Electro fusion Welding Machine Electro fusion Welding Machine is Kind of Electric Element that is Adapted With 220 and 110 Voltage and it Can Make Enough Degree For Polymeric Welding (260°C).

Welding The Pipe End and The Socket of Fitting are Pushed to Heaters in Axial Direction. Fitting Should Be Heated Simultaneously . At The end of Heating Period Fitting and Pipe and Separated Form The Heating Elements and quickly Joined Together in The Axial Direction .During Joining , The Pipe end Should not be Turned Around its Axis in the Socket.
Levels of Welding  1. Pipes are Measured and Cut to the Required Length. Cutting Should be Perpendicular to the Pipe Axis (90°).  2. Outer Corner of Pipes are Rounded-off by Using a Knife. The Surfaces to be Welded Should be Cleaned by alcohol and Wiped by a Clean Cloth or Paper.  3. The Socket Depth or the Welding on the Welding on the end of pipe.  4. The Pipe end and the Socket of Fitting are Pushed to Heaters in axial Direction. Pipe and Fitting Should be Heated Simultaneously.  5. At the end of Heating Period Fitting and Pipe end Separated From the Heating Elements.  6. Fitting and Pipe are Quickly Joined Together in the Axial Direction. During Joining, the Pipe end Should not be turned around its Axis in the Socket
next